- Double layer construction - wind stopper softshell fabric on dome - Breathable merino wool blend over ears and back of done for breathability - Ear opening for sunglasses to easily pass through for fit - Flat seam construction - helmet friendly
DeFeet Armskins are designed to provide a guard against the elements in chillier temperatures, making your rides and runs more comfortable. Armskins are engineered with an easy-on, easy-off stretch fit, covering from the wrist to the top of the biceps, and are ideal for cycling, running, and hiking to keep you warm in cold, wet conditions. Recommended for temperatures between 35° and 55°. - 49% Recycled Polyester, 48% Nylon, 3% Lycra
DeFeet's Armskins are great for cool mornings, long, chilly descents and unexpected weather. They're made from soft CoolMax for superb warmth, excellent moisture transfer and comfort. And, DeFeet's Stayfast cuffs and secure bindings keep these fine warmers in place. Plus these fine warmers pack small to easily fit in a pocket or bag so you can always take them along.
- Patented Halo Sweat Block Seal channels Sweat away from eyes and face - Dryline fabric absorbs Sweat - one size fits all - Made in the U.S.A.
- For maximum sweat absorption and sun protection - Micro mesh top allows heat to escape - One size, works great under helmets
Gain eye and ear coverage with double-layer merino wool. Flat-lock stitching makes for a comfortable fit under the helmet, and the flexible brim does not crease when crumpled into a pocket for storage. - Merino wool blend base fabric - Packable brim for storage - Three-panel crown for optimal helmet fit - Double layer wool for moisture wicking
Like their namesakes, “Crocs” have been around forever, they’re tough as nails and stand the test of time. The instep strap is now triple-bartacked BioThane webbing, and an additional tab holds down the front opening. The fitted design and durable, waterproof fabrics are the standard for which all gaiters are judged. - Gore-Tex 3L - 100% nylon - 70D plain weave leg panel - Cordura 2L - 100% nylon - 1000D woven foot panel - Windproof Waterproof, Breathable, and Abrasion-Resistant - Laminated Construction - Durable BioThane Instep Strap - Abrasion-Resistant Cordura at Inner Leg and Boot - Abrasion-Resistant Lower Boot Lined with Packcloth - Larger Circumference Accommodates Plastic Mountaineering Boots - Double Stitched Front Closure - Reinforced Boot Lace Hooks - Hook/Loop Front Closure - Buckle Top Closure
This reflective yellow leg band with adjustable hook and loop closure secures loose pant legs to prevent chain catching. - Reliable hook and loop closure system works both wet and dry - Reflective yellow material for additional visibility - 1.25-inch width
Lightweight and elastic helmet-compatible hat with wind-protective front. Tight fit. Details: - Hat with an ergonomic, close fit to be worn under helmet - Lightweight, windproof elastic fabric at front - Reflective print Fabric Composition: - Front Face & Back: 100% Polyester, Mid: 100% Polyurethane - Back: 87% Recycled Polyester, 13% Elastane
Lightweight and elastic arm warmer with brushed inside and ergonomic shape. Thin, lightweight and elastic fabric for freedom of movement. The ThermoCool fabric is made of two high-tech polyesters and has a brushed inside offering superb thermoregulation in fair and cold conditions. - Elastic silicone grippers keep the arm warmers in place. - Ergonomically placed seams follow the moving body. - Elastic seams in contrast color. - Anatomically shaped reflective logo. - Fabric: 87% Polyester, 13% Elastane
Lightweight and elastic thermal bike knee warmer with softly brushed inside for enhanced comfort and thermoregulation. Smooth, lightweight and elastic fabric for freedom of movement. Ergonomically placed seams in contrast colors, follow the moving body. Elastic silicone grippers keep the leg warmers in place. - Smooth, lightweight and elastic fabric for freedom of movement - Elastic silicone grippers keep the knee warmers in place - Ergonomically placed seams in contrasting colors, follow the moving body - Softly brushed inside for enhanced comfort and thermoregulation - Fabric: 87% Polyester, 13% Elastane
Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam
Nothing beats the all-around protection of a winter cycling cap. Not only does this piece keep your head and ears warm, but the bill forms a seal over your glasses to shield your eyes from wind and rain. This cold-weather essential is built with thermal fabric that balances insulation with breathability. It fits comfortably under a helmet and a port in the rear allows ponytails to pass through. FEATURES: - Pedal to Zero™: Going by bike 4mi / 6km offsets the climate impact of this garment - Made with recycled materials - Fits easily under a helmet - Protects ears from cold - Shields eyes from wind and rain - Rear port for ponytails FABRIC: - 79% recycled polyester, 21% spandex
Whether you’re preparing to hit the road or trail, the AmFIB® Lite shoe cover is the right choice to keep your feet warm and dry. The three-layer softshell fabric blocks the wind and sheds moisture while remaining highly breathable. A high cuff designed to overlap with tights ensures a comfortable seal, and BioViz® reflective elements on the toe, side, and heel increase low-light visibility. FEATURES: - Compatible with road and mountain bike shoes - Three-layer softshell fabric is windproof and water-resistant - Zippered closure for installation and removal - BioViz® reflective elements increase low-light visibility FABRIC: - 43% polyamide, 29% polyester, 28% polyurethane
No winter riding kit is complete without the proper headwear. The AmFIB® Lite Balaclava will help you conquer the cold with technical fabrics and thoughtful cycling features. Polartec® Wind Pro® fabric on the leading edge blocks the wind, while the highly breathable thermal fabric on the top and back keeps you from overheating. The hinged face covering is easy to pull down for eating and drinking, or to dump a little heat while climbing. It fits comfortably under a helmet and a ponytail port in the rear adds to the appeal of this full-featured balaclava. FEATURES: - Pedal to Zero™: Going by bike 5mi / 7km offsets the climate impact of this garment - Polartec® Wind Pro® fabric on the front provides protection where you need it most - Thermal fabric on the top and back ensures the right amount of breathability - Made with recycled materials - Hinged face covering is easy to pull down when needed - Rear port for ponytails FABRIC: - Main Body: 79% recycled polyester, 21% spandex Front Panel: 97% polyester, 3% spandex
All it takes is one experience with cold ears on a fall day to understand the value of a headband in your riding wardrobe. This cold-weather essential uses Polartec® Wind Pro® fabric on the leading edge to block the wind and highly breathable thermal fabric on the back to keep you from overheating. It fits comfortably under a helmet and a port in the rear allows ponytails to pass through. FEATURES: - Pedal to Zero™: Going by bike 4mi / 6km offsets the climate impact of this garment - Polartec® Wind Pro® fabric on the front provides protection where you need it most - Thermal fabric on the top and back ensures the right amount of breathability - Made with recycled materials - Fits easily under a helmet - Protects ears from cold - Rear port for ponytails FABRIC: - Main Body: 79% recycled polyester, 21% spandex Front Panel: 97% polyester, 3% spandex
Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.
- Balaclava with long drape - Merino wool blend fabric throughout - flat seam construction - helmet friendly
- Helmet liner - Merino wool blend fabric throughout - flat seam construction - helmet friendly
To keep warm and healthy, be sure to slip on Bellwether's Coldfront Cap before heading out the door. It combines a wind-blocking front with brushed fleece rear panels to keep your noggin warm and toasty on even the most blustery days. Plus, its thermal fleece interior helps trap heat while allowing moisture to escape for total comfort. And, it fits smoothly under your helmet.
$28.99 - $39.99
Louis Garneau's Knee Warmers 2 are crafted from Garneau's HeatMaxx nylon/spandex material with soft brushed insides for optimal moisture transfer and heat retention. You'll also appreciate the comfy flatlock seams, silicone thigh grippers to keep them in place, UPF 50 sun protection, and reflective accents for enhanced visibility. And, when you warm up, these warmers are easily stashed in a pocket or pack.
- Wind-resistant fabric - Microfleece lining - Reflective logo
A versatile accessory, the Elevate cycling cap features style mixed with performance features like TransTextura moisture transfer to keep your head cool and dry when it is hot and to wick sweat away when the weather turns cooler to keep you warm and dry. Perfect for protecting your head from the sun, wind, or cold. Features - Classic 4-panel structure and vents great fit and comfort - TransTextura moisture transfer technology - Hi-tech mesh fabric keeps head dry and comfortable - Absorbent brow prevents sweat from dripping into eyes - Perfect match with the Elevate apparel kits - UPF 50+
Lightweight sleeve protects arms against harmful UV rays. Coldflash fabric features a moisture-activated polymer which reacts with your perspiration creating a prolonged cooling effect during exercise in the heat. Features: - UPF 40+ - Cooling moisture-wicking fabric - Articulated-elbow design - Flat-seam construction
For the serious commuter, nothing beats the Jandd Ankle Strap. - Made from 1.5" hook-and-loop material - Meets SCUBA industry wet-strength requirements
Add a pop of color to your Q logowear collection with this hat featuring an abstract rendering of our new logo. - One Size - Adjustable
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. The Thermal Pro is Louis Garneau's warmest shoe cover that provides 360 degrees of customizable protection from the worst winter can bring. A seam-sealed 2 mm neoprene outer with a fleece-lined inner provides unparalleled warmth, a customizable under sole prevents anything from seeping up into your foot, and easy wide openings with waterproof zipper and covered zipper garage keep the fouls of winter weather at bay. - Under Sole: Durable pre-cut rubber sole for better water resistance - Side opening: Seam-sealed Hook and loop fastener with safety puller for easy slip on/off - Shoe Cover Visibility Features: HiViz 360 - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
A thin and warm hat designed to fit under a cycling helmet. The Skully features the DeFeet D-logo and is made from a soft, warm, and moisture-wicking fiber manufactured in North Carolina from recycled water bottles. Machine wash cool, tumble dry low. 55% Recycled Polyester, 41% Nylon, 4% Lycra
- Lightweight Cotton Twill - 3-Panel Dome with Traditional Flip Up Visor - Ribbon Sewn Down Center and Visor - KoolFit Elastic Sweatband - Twill-Taped Inner Seams - Size: M/L 7 - 7 3/8 and XL 7 1/2 - 7 7/8
- Wind-resistant/water-resistant - Insulation for warmth - Reflective logo
Page 1 of 6 Next page