Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Stems
$86.00
- 3D forged, 6061 aluminum alloy body with oversize box cross-section
- Oversized 52mm wide 6061 alloy faceplate
- 35mm handlebar clamp diameter
- Not OD2, regular 1-1/8"
$320.00
ULTIMATE PERFORMANCE
Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike.
STIFF AND LIGHT
With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION
The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem.
VERSATILE FIT
Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°).
$120.00
Zipp's Service Course SL Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes.
- Distinctive Zipp cosmetics
- Zipp Quickview integrated computer mount available separately
- Lifetime warranty
$59.99
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components.
- Bead-blasted, then anodized, finish
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design for easy installation
$315.00 - $320.00
ULTIMATE PERFORMANCE
Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT
With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION
The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT
Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°).
FEATURES
- Compatible with all Giant OD1 and OD2 head tubes sizes
- Available in ±10° and ±20° angles
- Available in eight lengths from 70 to 140mm
- Purpose-engineered shaping achieves maximum stiffness and lowest weight
- Integrated aero silhouette from stem cap to spacers
$36.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp.
- 2-D forged AL-6061-T6
- Four-bolt handlebar clamp
- 41mm height
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
- Weight: 130g-180g
$49.95 - $52.95
Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance.
- Bar Clamp Diameter: 31.8mm
- Material: Alloy
- Stem Angle: 30 degrees
- S.H.I.S. Stem Clamp Diameter: 28.6
$42.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$179.95
You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout.
- Material: 3D forged 7075, carbon encased body
- 4 x 4mm coated CrMo steel forward-facing faceplate bolts
- 2 x 4mm coated CrMo steel offset steer tube clamp bolts
- 5Nm torque max on all hardware
- Compatible with all 31.8mm bars
- Press-fit clamp design installs and removes like a standard stem
- Angle: 84/6 degree
- Stack: 42mm
- Steerer: 1-1/8"
- Faceplate Width: 42mm
- Matte UD carbon finish
- 126g (110mm)
$39.99
The Treymone stem features a 51mm reach and a 27mm rise.
- Trey Jones and Simone Barraco signature
- Heat treated cro-mo M8 6mm solid hex bolts
- Cold forged & CNC machined 6061-T6 Alloy
$54.99
The Box Two Front Load is a modern, 22.2 stem designed specifically for BMX racing. Box Two Front Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength.
-Material: 6061-T6 Aluminum
-Process: Cold-Forged
-Hardware: Chromoly Clamping Bolts
-Finish: Anodized w/Laser-Etched Graphics
Weight:
· 48mm: 224 g / 7.9 oz
· 53mm: 230 g / 8.1 oz
$135.00
Designed as a replacement for the AM stem, the all-new TR stem matches the aesthetic of the Gravity stem but is tailored for downcountry/trail and all mountain use.
KEY FEATURES
- Opposing steerer clamp bolts to give exceptionally rigid steering characteristics
- 2 piece front plate design with a simple “no gap” clamping system
- Optimum machining to give lightest weight without compromising stiffness
- 32, 40 and 50mm lengths Ø31.8mm clamp
- 35, 40 and 50mm lengths Ø35mm clamp
- CNC machined from a solid billet of 2014 T6 aluminium
- Zero rise
- 56mm clamping width
- Stainless steel taper head screws supplied
- To suit Ø31.8mm and Ø35mm bars
- Available in: black, silver, red, blue, purple, orange and new bronze
- Weights 32mm reach, Ø31.8mm – 123g // 40mm reach, Ø31.8mm – 131g // 50mm reach, Ø31.8mm – 150g // 35mm reach, Ø35mm – 121g
$280.00 - $300.00
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars.
- Material: Carbon
- Faceplate material: Aluminum
- Hardware material: Titanium
- Clamp Diameter: 35mm
- Steerer Clamp Diameter: 1-1/8-inch
- Torque Spec: 5.5Nm
- Weight: 85g (35mm), 92g (50mm), 99g (65mm)
$125.00
A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications.
- Blind bolt holes and shaping
- Cold-forged and precision-machined
- No-gap face plate and clamp area
- Stainless hardware
$58.00
Basic, clean, and dependable performance—that's the Gossamer stem. 6061-T6 aluminum is forged and then CNC-machined to achieve the Gossamer's shape. The four-bolt faceplate is cold-forged and holds the bars with authority. Laser-etched graphics are the finishing touch.
- 3D-forged and CNC-machined from AL6061/T6
- 4-bolt cold-forged front clamp diameter
- Chromoly hardware
$399.00
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress.
- Material: Carbon monocoque with forged alloy steerer clamp
- Stem Angle: 84 -degree
- Drop/Reach: 126/75mm(Measured center-to-center where the levers mount)
- Sweep/Flare: 4.7/1-degree
- Features mounting holes for computer/accessory mount
- Matte UD carbon finish
- Weight: 350g (42cm x 100mm)
$69.99
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: In this particular model stem we’ve modulated the Oversized formula to emphasize pedaling stiffness. We have transferred material specifically to sectors that experience sudden stress from pulling up on the handlebars. You’ll feel a difference in your acceleration. These stems are engineered for the larger-sized racers.
-Material: 6061-T6 Aluminum
-Process: Cold-Forged
-Hardware: Chromoly Clamping Bolts
-Finish: Anodized w/Laser-Etched Graphics
Weight:
-48mm: 280 g / 9.8 oz
-53mm: 290 g / 10.2 oz
$39.99
With its alloy/steel construction and 4-bolt clamp design, the MX is a trusty BMX quill stem.
- Quill Length: 4-1/4-inches
- Quill diameter: 21.1mm
$32.00
FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks.
- 3D-forged and CNC-machined from AL6061/T6
- 4-bolt cold-forged face plate
- Chromoly hardware
- ±6°
- 31.8mm handlebar clamp diameter
- 35mm fork clamp stack height
- 127 grams (100mm)
$179.95
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware.
First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness.
The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout.
- Material: 3D forged 7075, carbon encased body
- 4 x 4mm coated CrMo steel forward-facing faceplate bolts
- 2 x 4mm coated CrMo steel offset steer tube clamp bolts
- 5Nm torque max on all hardware
- Compatible with all 31.8 bars
- Press-fit clamp design installs and removes like a standard stem
- Angle: 84/6 degree
- Steerer Height: 42mm
- Steerer: 1-1/8”
- Faceplate Width: 42mm
- Matte UD carbon finish
- 126g (110mm)
$119.99 - $120.00
Engineered exclusively for OverDrive Aero steerer tubes, the Contact SL AeroLight stem is a lightweight and stiff alloy stem featuring easy-to-install cable integration for optimal aerodynamics and a clean look.
FEATURES:
- Made for OverDrive Aero steerer tubes only.
- Integrated aero silhouette unites the stem cap, spacers, and head tube for aerodynamic advantage.
- Ultra-light alloy design delivers maximum stiffness at a super lightweight.
- Easy cable management guides all cables under and inside for optimized aerodynamics and a clean look.
- Fits current generation Contact Aero or Contact D-Fuse handlebars.
- Available in eight lengths from 80mm to 140mm.
SPECIFICATIONS:
- Weight:161g (100mm)
- Length: 70/80/90/100/110/120/130/140mm
- Angle: -10°
- Bar Clamp Diameter: 31.8mm
- Steerer Tube Clamp Diameter: D-shaped OverDrive Aero, 1 1/4 inch
- Stack Height: 40mm
$109.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength.
- CNC Aluminum
- 0-degree rise for perfect fit on aggressive bike frames
- Extensive CNC machining for weight reduction without impacting strength
- TopLock faceplate design for easy and secure installation
$98.00
Velo Orange Removable Faceplate Quill Stem. For any classic roadie, tourer, mtb, or any other bike with a 1-inch threaded steerer. These stems feature a simple 2-bolt removable faceplate for use with any handlebars including modern bars with 31.8mm clamp diameters. The 90 degree extension gives a bit of rise without looking out of place on a custom build.
- Height above insert: 130mm
- Use shims for 25.4 handlebars (sold separately)
$99.99
Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars.
- Finish: Black Ano
- Weight: 130g (100mm)
- Rise: Varies
- Clamp diameter: 31.8mm
- Steerer: 1 1/8-inch
- Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm
- Materials: EA90 alloy
$59.95
- Bar Clamp Diameter: 31.8mm
- Material: Alloy
- Stem Angle: +17 degrees, -17 degrees
- S.H.I.S. Stem Clamp Diameter: 31.8mm
$90.00
- 6061 premium alloy
- Designed to be light and strong
- Enduro/DH focused
- 31.8 & 35mm clamp
$236.00
- Stiff, ultra-light, full-composite oversize box-section increases torsional stiffness with tuned vertical compliance
- 46mm wide alloy faceplate
- Titanium hardware
- Recessed top cap and semi-integrated spacer maximizes stem to steerer contact
- ± 8° rise requires fewer spacers
- 1-1/8" steerer adapter included
$24.59
Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.
$29.99 - $32.00
Dimension 26.0 Stems
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Fully forged AL-6061-T6
- 4-bolt handlebar clamp
- Weight: 140g-180g
$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems.
- Class-leading stiffness-to-weight ratio
- More options for a better fit
- New faceplate and geometry for greater stiffness and easier installation
- Distinctive silver finish
Page 1 of 6
Next page