Filter By:
Tools & Tuning

$16.99 - $120.00
The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F)
- Recommended iron temp: 150°C (311°F).
- Replaces the CH5X.
- -10°C to -18°C (14°F to 0°F).

$15.00 - $120.00
PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F).
- Recommended iron temp: 130°C (266°F).
- Replaces the CH8X.
- -4°C to +4°C (25°F to 39°F).

$50.00
Complete kit for maintenance of steel edges. Takes down the side edge to 88 or 87 degrees. Contains practical file guide in pocket format with file, diamond grindstone for polishing, coarse grindstone for removing hardened steel, and ski brake retainers.

$6.99
It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220.
- Base Preparation

$14.99
Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

$16.99 - $120.00
PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F).
- Recommended iron temp: 140°C (284°F).
- Replaces the CH7X.
- -2°C to -8°C (28°F to 18°F).

$16.99 - $120.00
PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F).
- Recommended iron temp: 145°C (293°F).
- Replaces the CH6X
- -6°C to -12°C (21°F to 10°F).

$16.99
F4 is a universal glide wax for skis and snowboards. A wax with a wide range of uses.
- Universal wax for all temperature ranges
- Easy application method
- Convenient pocket size
- Glide wax for ski mountaineering and summer skiing

$16.99
The ideal brush when applying any F4 product. White felt for spreading the F4 product evenly on the base and for polishing. The nylon for brushing and removing excess wax from the structure. This process will increase the durability of any F4 product. Good quality.
- For training and competitions
- Fluorine free and 100% biodegradable
- Thoroughly tested on several types of conditions
Page 1 of 1