Other

A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Chrome allen seat binder bolt

• Aluminum clamp • Built-in rear rack mount

- DT Swiss cartridge bearings - Sold in pairs

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

• Aluminum clamp with a chromoly bolt

- Fits Shimano and ISIS BBs - Single key release - Shell: 15mm SHI/ISIS axle bolt one-key release - Sold in pairs

- Model: Replacement bolt - Compatibility: Allen, M5x16

• Aluminum • CNC-finished

Designed for maximum comfort, ergonomics, & durability - Bag of 10

- Stainless steel button head bolts - Sold in bags of 10

- Ahead Stem Shim allows the use of 1-1/8 stem on 1" steerer tube - 28.6mm/25.4mm

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

- Replacement padded arm rests for clip-On Tri-Bar II - Easy clip on installation fits most road bars - Clamp Size: 22.2mm

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

• Forged aluminum seat clamp • Chromoly integrated QR seat binder bolt • Increased durability and clamping force

• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish

• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm

- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10

• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt

- Sunlite replacement cartridge bearings - Sold in pairs

- Variable widths - Left: 35mm - Center: 52mm - Right: 37.5mm - Length: 124.5mm - Overall: 145.5mm

- Alloy construction - Great for Cruiser or BMX bar conversions

- Replacement front cable hanger - Aluminum construction

- Aluminum w/lock nut and mount - Slotted mount design

Sunlite braze-on front derailleur adapter

• Quick-release seatpost clamp • Chrome-plated chromoly • Rubber-covered handle for a great grip

- Type: Lock washer - Size: 1" Keyed

- Crown Race - Size: 27.0mm

- Rust-resistant coating - M8x16mm - Shell: 8mm flanged axle bolt - Includes 2 bolts

- w/Nut - 1-3/4-inch

46 x 55 x 51 x 152mm

- Large Flange-Fits Splined MX Cranks - Sold in pairs

- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10

Replacement LH cup for English threaded European bottom brackets. - Cup Material: Steel

Sunlite's Lowrider Sissy Bar adds that level of style and classic looks that only a nice, long sissy bar can. Keep that banana seat comfortably slung and looking tight.

- For MTB levers - 7mm x 1mm - Aluminum construction

- Axle mount rear derailleur guard - Essential for children`s multi-speed bikes

• Quick-release seatpost clamp • Full stainless-steel construction • Rubber-covered handle for a great grip

- Rust resistant coating - M5x.80mm Thread pitch - Bag of 10 - Size: M5 x 16 Thread Pitch: Braze-on bolt

- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm

- Standard replacement cantilever/v-brake bosses

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Standard steel replacement

- Use: Brake - Length: 30mm - Diameter: 5mm

- Use: S.I.S. - Length: 30mm

Replacement bearing for the lower half of YST8003 #7 headset.

- Cartridge Bearing - 1-3/8-inch Outer Diameter

- Rubber - Color: Black

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Replacement M5 lock nut for cable anchor bolts, fender bolts, etc. - Bag of 10

- Crown Race MX - Size: MX TH 26.4mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Universal design double rail saddle clamp

- 8x1mm Allen head

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Hub sealed bearing - Fit: ID 15mm - I.D.: 15mm - O.D. 28mm - Width: 7mm